1mm allen key??
 

Good afternoon!

I'm trying to take apart a Vfc scar-l gear box to put a slower spring in but there's a spot on the exterior of the mech box with the gear selector guide where it looks like a 1mm or 0.5 mm allen is needed... question is... where do i get one?

thanks!

Canadian tire has metric and imperial sets. $10-15

If you can't find one locally a set like this has those sizes: Amazon.com: Neiko Tools USA 30 piece SAE and Metric Combination Hex Key Set: Home Improvement

Smallest one I found was 1.5mm

I got an set from walmart made by "fuller" it has a .9mm

Probably a stupid question but are you sure it's not 1/16" or .050"? I've seen stranger things... Even if everything else on the gun is metric...

1/16 is smaller, you best compatibale was 3/32 but even that will strip it pretty quick.

most rc hobby stores should have these

The small screwdriver sets you can get at most computer stores has a wide set of tiny allen keys.

Thanks for the replies!

I'm going to stop my adventure of how to ruin a mechbox and pay a gundoc to downgrade the spring.

On that note anyone know a gun doc in the that can change out a spring by June 4? The zombiez must die by a Scar!

the size that you need for the ambi selector switch on the gearbox is .9mm
i got one at walmart of all places. it was in a $14 kit that has a yellow case. check out walmart and you should be able to find one.

This is the Allen Key set form walmart.... around 10-15$, has all the sizes you'll ever need in allen keys....

http://s3.hubimg.com/u/4255194.jpg

It's actually an imperial allen key, .050", smaller than 1/16"
I've got one in my bondhus allen key set

Have any of you seen a set of these where the metric allen keys are longer than the imperial?

I'm an onroad RC racer and I use these for both RC and airsoft: http://www.amainhobbies.com/product_...Hex-Driver-Set

Pricey yes, but absoutely top notch quality. Never have to buy another set in my life.