Bullpup M14
 

My next project is a Bullpup M14, exactly that(AWCG2A):
http://i786.photobucket.com/albums/y...uns/AWCG2A.jpg
I started with a normal ACM ABS stock:
http://i786.photobucket.com/albums/y...4/P6080046.jpg
After I covered it with PVC/PUR foam blocks:
http://i786.photobucket.com/albums/y...0M14/Kp018.jpg
Next I sanded it into form:
http://i786.photobucket.com/albums/y...zgcucuzgcv.jpg
Then I covered it with polyesther resin/fiberglass laminate:
http://i786.photobucket.com/albums/y...4/DSCF1023.jpg
I made the cheek piece same way:
http://i786.photobucket.com/albums/y...4/P7200131.jpg
Some days ago I sanded... sanded... and sanded:
http://i786.photobucket.com/albums/y...4/P7170126.jpg
The reason of posting here too, that I really need L85/SA80 trigger dimensions:
-Thickness in mms(form is OK from plans, but I don't know the "third dimension of it")?
-Cross section shape(at back contour "sharp" or "flat")?
If you have this gun(SA80/L85) please post here at least th thickness... please... Thanx!
:D:D:D:D:D

Awesome progress !
how are you doing the wiring?

Huh, this is brilliant.

I've been wanting to make a bullpup SMG based off of a mac11. Where do you buy the materials to do this? Very interested...

Fiberglass airsoft... mmmmmm :)

-full auto: trigger switch 'bridged'
-semi auto: full auto+burst wizard set into 'DMR-mode'(1 shoot/s).
-a toggle switch to select between the two functions(right-full/middle-safe/left-semi)
-electro trigger(to on/off the function)

I think google will show you where to get materials(also used for sailing boat building/repair) ;)

VERY impressive work!

So yours looks like it's going to be fairly shorter than the one pictured eh? Or are you going to use a full length barrel set?

That is beautiful. Good job, excited to see the finished product. Maybe...patent?

Great job so far!!

I would love to see you on the field

what measurements do you need from the L85. I have the ICS version perhaps I can help

That's great!
-At arrow: sharp or or flat(and which cross-section type)?
-At "X": thickness from left to right side of the trigger in mms(perpendicular to photo's level)?
http://i786.photobucket.com/albums/y...s/L85-SA80.jpg

And thanx again!!!

I'm in Europe so sadly we can't met on battlefield...:(

I'll use short barrel, with the long version's flash hinder...

Very, very nice! I approve!

I worked on the metall parts, and the rubber stock end(It can be finished 100% just after the stock is painted):
http://i786.photobucket.com/albums/y...P1010149-1.jpg
I cut off the front sight... but it looks like "removed" like on this photo:
http://www.revistaarmas.com/wp-conte...-Bulldog-2.jpg

Now metall parts fit into the stock(including battery). I have to make the trigger system, and finish the charging handle. I'll use that red/green dot on it.
http://i786.photobucket.com/albums/y...4/P8220168.jpg

impressive work!