PEQ box question
 

Hey, I have a 9.6V 1600 mah battery. They are arranged in the nunchuck style...however, it's 4 batteries on each nunchuck end to end. Is there a PEQ box available to support this kind of battery?

It looks exactly like this, except, the nunchuck style...so, they're not attached together as seen in the pic.

http://www.airsoftgi.com/images/pic-...m-mini-btt.jpg

Thanks guys!

bump

possibly a PEQ2, but they're usually shoddy and look awful. I bought a PEQ-15 and got custom 9.6v block mini batts to fit in it.

Would you be able to provide a link of where you got the custom 9.6V NiMH battery pack to fit inside a PEQ-15 Battery box.

Thanks!

i am actually wondering the same!, i wanted to get a PEQ-15 but didnt think my battery would fit and ive been looking around trying to find something to say what battery would fit in the PEQ-15 but form what i know the only way is to get a different battery. but any help to this or any suggestions would be awesome!

got it done at prairie battery, you can ask cheapbatterypacks.com to do it

You won't get a 9.6V NiMH nunchuck into that PEQ15. For a PEQ2, the 9.6V cells are arranged in a square configuration to fit it.

I run mini 11.1V and 7.4V square shaped Lipo in my PEQ15. Because the packs are only 1300mAH, just carry a second one on your vest. The nice thing about the PEQ15 is it puts very light weight on your front end and a quick change if needed since it is external.

Don't recommend a PEQ2. Take your current 9.6V and strap it to the front end and try shooting with it for the day then you'll see that the PEQ15 makes more sense.

There is a PEQ15 here with 9.6V NiMH but 1400mAH arranged in a 3x3 setup. http://www.airsoftparts.ca/store2/im...bc-04-DE_2.jpg