WEHK416 Magpul MOE grip
 

Hello

I was just wondering if anyone know how to install a Magpul MOE grip onto a WE HK416. Are there any modifications needed?? Step wise procedures will be much appreciated :D

Thanks =)

I installed one onto my WE M4, all that is required is drilling a small hole.

On the right side of the grip, there is a spring that pushes a pin up into the fire selector. you must drill a hole down into your grip(the MOE).

Be careful how deep you go.
I kept checking, and it wasn't deep enough. The next thing I know, It's too deep, and I had to shim the spring higher.

http://img854.imageshack.us/img854/1313/drillf.png
Imageshack made me register my email... so I removed the link... F***ers

Oh great. Thanks for your help =)

is the drilling also required on the RS grip or just the replica MOE grip?

The RS grip has the hole drilled already; it's just the replica that needs it.

is the hole for the real magpul grip in the same place as the original grip?

yes i believe so.

The hole is to retain the selector switch detent rod and spring.. the Magpul grip is a drop in replacement for the original grip.. hole in the same place

Thank you all for such wonderful knowledge!! =)

oh sorry, one more question. Is the grip screw (part #80) a hex screw or a screw like this one?
http://www.airsoftoutletnw.com/index...mart&Itemid=28

I dont have access to my 416 at the moment so I cant check. =)