Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Newbie Tank (https://airsoftcanada.com/forumdisplay.php?f=203)
-   -   Replacing Flash Hider with Silencer help! (https://airsoftcanada.com/showthread.php?t=144750)

xKajuNx August 28th, 2012 14:11
.

ceazer August 28th, 2012 14:19
Quote:
Originally Posted by xKajuNx (Post 1697077)
Hello, I have a GSG 522 RIS Blowback and I can't seem to figure out how to remove the flash hider. It says it has a 14mm a.c. threaded outer barrel and I've tried twisting the flash hider but it wouldn't loosen up. Can anyone tell me how I can remove the flash and replace it with a suppressor?

Thanks.
check for a small allen screw. if not the flash hider is more then likely glued on. heat around the barrel/flash hider with a blow dryer and then try turning the flash hider counter clockwise (if its ccw) and it should come right off. not sure about gsg tho

Andre_1999 August 28th, 2012 16:08
DON'T JUST KEEP SCREWING IT REALLY HARD!

You will damage the threads on it if it has a screw, look for the screw then what ceazer said use a blow dryer to weaken the glue.


All times are GMT -4. The time now is 01:19.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.