Wa m4 build problems
 

A little while back I got a pretty good deal on a used WA system M4 with 5 mags.I encountered some problems which forced me to change the metal body,BCG, and hop up.

The problem was that the worn down Inokatsu Superbolt that was inside would "explode" within every 10-15 shots. What I did was replace the Superbolt with a new one. PROBLEM SOLVED :D

Then a new problem occurred, Withen every 15-25 shots, I'd shot half a BB. and the other half would be mashed to bits inside the gun. Its not like I was using some cheap bbs too, I tried MADBULL, KING ARMS, BB BASTARD, and EXCEL, all with the same result, I'll shoot half a bb. So I replaced it with a G&P hop up chamber because it might have been the prime hop up chamber ( the one that lets you use aeg hop up and barrels)

Then my last problem is a from my own frustration I smashed the upper receiver onto my laptop, destroying both laptop and upper ( this is why I needed the new upper and lower )The metal body that was on before was a Tango Down ECR 4 body made by classic army, I've switched to a king arms body.



This what will be in my gun.

G&P 3rd burst kit
G&P hop up, rubber, barrel
Inokatsu superbolt (2010,2011? not sure)
KING ARMS metal body
KING ARMS bolt lock
G&P Buffer + spring

mags I'll be using G&P P Mags for WA


This is what was in my gun

Unknown make for trigger grouping, sear, selector, hammer, firing pin. bolt lock. (China?)
CLASSIC ARMY ECR 4 METAL BODY
Inokatsu SuperBolt (2010) and a RA tech bolt (spare)
Prime AEG Conversion hop up chamber
unknown make for inner barrel (china?)
Unknown make for Buffer ( had some weights in it ) and spring

mags I was using PRO-WIN version 1 m4 mag.

I know more or less I have enough spare parts to build 2 seperate guns :banghead:

I'm more or less posting this to let you guys have a good laugh about my stupid experience with this gun. I'm 1700 deep in this pile, and also to ask you guys kindly for some advice because I'm too damn stubborn to give up on this build.

Not 100% sure on this but are the inokatsu BCG longer than standard WAs? I know for a fact there are longer than normal bolts out there and that the King Arms receiver is very much a standard clone. Perhaps you should switch to a King Arms or G&P bolt carrier and see how it fares.

Nope. The INO BCG includes an adapter to make it longer (or "Prime-spec"). It is completely compatible with G&P/KA bodies.

Woah... Pics?

well what happened was i held it by the rails and swung it on the screen. knocked the screen off and kept smashing. I dont have pictures of the computer, this happened like a few months ago. incase your wondering what was going on, I was watching a tutorial on something related to WA and it pissed me off