Rail handguards for Type 56-1 & Cyma AKS-74U help
 

Hi there.

I'd like to put some some rails on my RS Type 56-1 and Cyma AKS-74U but am not sure what handguards would fit...

I'll start with the RS, I figure since it's suppose to be very realistic that a real RIS handguard would work but was looking for some confirmation. Not sure if it's an issue but I run lipos that extend into the upper handguard.

Next I'd also like to put a rail system on my Cyma AKS-74U as well. I read that Cyma's build is different from VFC & Dboys and while I've found rails that are compatible with the latter, I have yet to see something that has been confirmed to work on the Cyma.

Any help on finding something that works would be appreciated. Yes I prefer the look of AKs without rails but I've got to be realistic, I like to bolt crap onto my guns. ;)

Thanks.

Off the top of my head

Type 56-1

1. Any RIS designed for a real AK-47 front end will work.


CYMA AKS-74u
1. Use a rail adapter on the side optic rails, but you lose the ability to fold the stock.

2. Front RIS
http://www.ebairsoft.com/aabb-alumin...4u-p-6178.html



There are a few others, like Rails that replace the rear sight and rails that co exist with the AKS-74u rear sight, but they aren't built for airsoft gun dimensions.
Hope this helps

http://airsoft-club.com/shop/externa...dguard-black79
Here for yer cyma.
As for the RS as far as i recall real sword usd real parts with little or no modification.
If thats the case how bout one of theese.
http://www.airsoftcanada.com/showthr...ghlight=keymod

The CYMA AKS74U is TM type/compatible. So anything that works with TM compatible AK's will work.

Many thanks gents, looks like I'll be running more AKs in the near future. :)