SR25 One Point Sling
 

So I'm trying to track down a One Point Sling adapter for my Echo 1 SR25. I'm not sure what's compatible or not, but I'm looking for a rear sling adapter. If anyone has any information on what will work in the SR25 I'd be very grateful.

Thanks

EDIT: Heres my stock

http://i.imgur.com/t8Tcf5y.jpg
http://i.imgur.com/LVLsLx9.jpg

It has a full stock?
Not much if it does. If it has the lil hole near the body on the full stock you can do what i did on my stock and just get a bolt with a loop on the end that fits through the hole a cpl washers and a nut.
Or good ol fashion parcord
If its got a crane stock it should take any single point sling attachment.

It's not a full stock, it's a crane stock. I updated my original post to include pictures. It does have a little hole in it, completely forgot about that. Is there an adapter that just plugs into there?

Nah you dont want it there. (least most folks wouldnt want it there)
The buffer tube comes off the adapter slide on and the buffer tube goes back on and holds it in place. The attachment point will be right at the back of the reciver on either side (or most likely both sides)
http://www.airsoftparts.ca/store2/im...475o-ag-od.jpg
I use this one.
http://www.airsoftparts.ca/store2/im...ing-swivel.JPG
QD one if you like
http://www.airsoftparts.ca/store2/im...-m4m16.jpg.JPG
The asap is nice if you shoot both ways like me. If your sling isnt bungee it makes off hand transitions easier

I also have the middle one on my SR-25 (lower profile, it looks like a very thick "stock" plate, with the holes in it). Very strudy.

However, if you plan on playing with your SR-25, a 3-point might be a better idea, as it is a very long rifle to sling 1-pt.

John and I were staring at your exact gun at the Finch's game yesterday and commented on how you could use an ASAP plate on that. LOL!!

This:
http://www.airsoftstore.ca/images/PTS-ASAP-AEG.jpg
With this sling:
http://www.airsoftstore.ca/images/PTS-MS3-BK.jpg

Add this if you want it multi-point:
http://www.airsoftstore.ca/images/APTS-RSA.jpg

The Finch game yesterday made me realize how bad I actually need one. My necks all ripped apart from rigging up a DIY sling yesterday using some random stuff I found.

Im going to take a look at that stuff, thanks for the help!

The MS3 is a sweet sling. Goes from 1 point to 2 point in 2 secconds and has a nice big handle for fast on the fly adjustments. I use it for my mp5k when sniping. Two point and sling it on my back when moving with a group to keep my bolt action at the rdy swap over to 1 point when moving alone go keep the mp5 at the rdy.
Its sturdy and yet it has a silky smooth sort of feeling to it so its comfy on the neck and such.

One thing to think about when looking at the ASAP plate is if you often detach/re-attach your sling for whatever reasons, I personally end up doing allot of diving through windows/climbing/etc.. and remove my sling from my rifle often, (love the magpul ms2 sling for this)
I have discovered that the ASAP plate is not so good for me as I end up fumbling with it looking for the ring to re-attach my sling all the time.

My prefferences are these two:
This one has larger easier to use loops but slightly digs into my hand at times when firing from akward positions: http://airsoftdepot.ca/catalog/produ...q54i3phmis8e35
And this one which is more streamlined and out of the way but allot fewer slings will work with it: http://airsoftdepot.ca/catalog/produ...q54i3phmis8e35