Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Accessories Discussion (https://airsoftcanada.com/forumdisplay.php?f=25)
-   -   Holographic sights and GBBRs (https://airsoftcanada.com/showthread.php?t=153913)

moomoosaysdacow April 29th, 2013 00:26

Holographic sights and GBBRs
 
I'm thinking of picking up a WE SCAR over the summer and have a question regarding sights. I've heard that the recoil of a GBBR can be enough to upset the zero of certain sights. Are there any replica sights that are known not to lose their zero with GBBRs? Or am I out of luck and have to buy a RS sight?

terrorist one April 29th, 2013 01:05

Honestly i have used a Huang 552 on my we for over 2 years. Never lost zero. I also have used it on my Just right carbine(9mm) and it never lost zero. But from what i know, its a hit and miss. Gbbr's are usually not that hard on cheap sights.

MaybeStopCalling April 29th, 2013 01:14

I have two 552s from Toronto Airsoft. Both have held zero and are still kicking on a M4 with RS buffer, steel bolt. The adjustments are mushy though, the one I bought just now is perfectly spec'd for an RS rail, the older one from a year ago, not so much.

Heerven April 29th, 2013 07:31

I have a Hurricane holo 552. No problem

dracu April 29th, 2013 12:39

well, instead of making another thread i might as well post it here.
i have a few questions for all those hurricane users on gbbr(only). especially for the 553.

1. how long have you been using this sight on your gun?
2. what platform, brand, and how heavy is the recoil of your gun? also how hard are you on the trigger?
3. what are the issues/problem you encountered so far? e.g., fitments, off centered reticule, etc.
4. for the one's that failed, how long did it even last? is it fixable?

i know glare is a common issue with most replica but can we use those anti-glare, protective shield that is use on cellphone and tablets?

i am very close from getting this so i need some input.

thanks.

Brian McIlmoyle April 29th, 2013 12:45

I've had several models of Replica Eotech sights.. even the Hurricane which is about the best one you can get ended up crapping out on my GBBR ( of course I've had a couple shot out as well )

so I stopped screwing around and got a real one. no glare, no shaking itself apart..
holds zero, and I can use it on my RS as well.

save up double the cost of a good replica, and buy a real one.. you will be glad you did.

Danke April 29th, 2013 12:51

Like Brian said. Real = real.

No recoil issues. Tons of used ones on here in the classified for fair prices.

Also the real reticle is so much better than any of the copies there is no comparison.

kullwarrior April 29th, 2013 13:51

Quote:

Originally Posted by Danke (Post 1789987)
Like Brian said. Real = real.

No recoil issues. Tons of used ones on here in the classified for fair prices.

Also the real reticle is so much better than any of the copies there is no comparison.

Oh that note though, If you're speaking of Holographic sight as L3 EOTech's HWS, they are a pain if you ever need to get it repair, a lot of them are listed on ITAR making export/import a pain if not impossible (if your unit was not legally exported out of US, you can't return it to the states to get it fixed)
This is one of the benefit running non-american electonic optic (Aimpoint for example)


All times are GMT -4. The time now is 21:22.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.