AUG feeding issue
 

I have a CA AUG A2, never fielded. It will fire 1 and then 3 blanks and so on. If I wiggle the mag, I can hear a bb pop into place. Then I can shoot the one bb. I have also tried both midcaps and highcap. The stock highcap is slightly better but still not feeding well.

Any help would be appreciated!

http://i41.tinypic.com/ifza4l.jpg
http://i42.tinypic.com/6h5or4.jpg

The AUG feed tube is notorious for causing troubles. Recommended is an aluminum replacement tube.

Like this:
http://www.ventureairsoft.ca/item.ph...2fbb7a6681e0e0

My CA AUG also had bad feeding problems.... fixed with a new hop up unit. The stock CA ones are garbage. Also the feed tube would be a good idea.

Which hop up did you get? G&P high performance or G&G metal? I heard there is compression issue with the G&P one.

Also, could you tell me which website you buy your hop up from? Thanks!

Lonex... didn't fit 100% perfectly, had to do some fiddling, but it's giving me a good airseal now. 395fps with an m110

The feed tube doesn't work in CA AUG.

Usualy with that kind of problem first thing that you should check are the bb's... bio BB's will get stuck in midcap, but if you have a problem with a hicap, and also you dont hear that dumb sound when firing lige the hop up is to tight than you shoud change it couse it is not allowing the magazine to feed it right :)

This goes for all aegs not just the aug... :)

I'm having feeding issues... again. Gonna try to swap out the feed tube when I can.

Thread hijack gooooooooo

CA Aug A2

Feeds with stock hicap only, have tried KA mags and MAG mags, very inconsistent feeding, a lot of dry fire going on. Can anyone else confirm that the Deep Fire nozzle won't fit the CA AUG? And does anyone know where to get one in stock?