Trying to find an ics m4 hopup unit
 

Used google...any stores selling this seems sold out every page I check??

Is there a way to use other than ICS for the hopup?

ISC uses the same spec as an old-school marui. check out 2 peice marui M4 hop up and you'll find what you need

ebay has them http://www.ebay.com/itm/ICS-MA-09-M4...item3383cf91f8 or http://www.ebay.com/itm/ICS-MA-09-M4...item3a7d94079b i usually find you can get them to ship to canada OR a lot of guys buy from Blazing Toys and have only good things to say about them ( and they have ics hop up units in stock)

Blazing toys is the place to go, they have all ICS stock pieces.
http://www.blazingtoys.com/product_p/bterics-ma-09.htm

Peace out'

You guys are the best, thx

Mach1 Airsoft also has a lot of ICS items I believe.

You can also use a regular AEG M4 hop-up, but you have to shave the front side of the square mag stop (around the feed tube) and use a TM-standard nozzle.

I plan on standard m4 metal one piece, and to shave down the square. Ill order a tm nozzle at the same time.

Thx

Well the ICs hop-up unit is way better than the standard style M4 hopups.
If you can source a replacement, it's a better choice.

Also the nozzle does not need to be TM specifically, any "not ICS" works, as long as it's designed for a TM-spec M4.

What about the metal hopup thats on airsoftstore.ca? Is it as bad as any standard 10$ unit?

Sourcing the ics seems very hard in canada.

The gun shoots about 100 feet before the bbs keep curving down, i suspect its the hopup and why i was going to buy another.

It's not bad, most M4 use this.

However the ICS hopup is better that's all.