In need of a little help for my KJW P226
 

I'm looking at upgrading my P226, It may be my lack of knowledge or lack of information thats stopping my little project, here's my 2 issues
1. There is so many TBB I'm not sure which are compatible with my pistol, I'm looking for a 6.03+/-mm barrel thats about 200mm long. Any suggests on type or is this not a good idea?

2. I have a -14mm threaded (CCW) outer barrel, I will need a mock suppressor to protect my longer inner barrel, but here's the kick...I want it to be able to fit inside my CAA Roni as well. So I'm limited to a maximum diameter of only 24mm for said silencer, I have had no luck in finding one, and I've looked on many sites. Any help to lead me in the right direction would be greatly appreciated.

My issues may be a simple oversight on my part, but I have seriously tried my best to figure it out myself with no luck

JK

i had a WE P226 (which together with KJW, is a Marui clone). your project is very much alike what i had done to it. So here we go:

1. stock inner barrel is 96mm, and the longest i ve seen is around 180mm long, there are mock silencers about 120mm long that will do fine with this barrel and it is about 20mm

2. as i said previously, with only 20mm diameter, a mock silencer should enter the caa kit with no much trouble.

i bought the parts from WGC, ra-tech inner barrel, and china made mock silencer, they are under categories inner barrel - pistol, and accessories > silencers/supressors.

Awesome, thanks a tonne loosecannon. This totally solves my issue!

I called my friend (who i sold the silenced gbb), he told me the silencer is 30. Sorry for the hype.

Have you ever seen this? I think it may suit your needs, see where the threading connects? Seem thinner than the rest of the tube.
http://www.wgcshop.com/wgc2008/main/...view_choice=c#