Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)
-   -   KSC M11A1 INGRAM- wut type of gas? (https://airsoftcanada.com/showthread.php?t=16701)

anonymous_joe October 6th, 2005 18:50

KSC M11A1 INGRAM- wut type of gas?
 
7arial

I was wondering what type of gas the M11A1 Ingram takes, because some sites say green gas others HFC 134a. What type of gas is it :?: If anyone knows plz reply.


:kill:

CrazyChoda October 6th, 2005 19:28

Propane/Green gas, it is tiwanese so it is built for it

-Choda

Kid October 6th, 2005 19:30

Quote:

Originally Posted by CrazyChoda
Propane/Green gas, it is tiwanese so it is built for it

-Choda


although i want to leave this mostly because of his grammar.. this would rip his bolt apart and this is not cheap to fix, HFC 134 is duster gas, send it through the search to get more info

anonymous_joe October 6th, 2005 19:43

Thanks for the info because most reviews say it takes HFC 134a and some say green gas. So thanks for clearing it up and i dont care about grammar!!

fly_boy October 6th, 2005 19:54

anything you want, just keep your kit clean and lubed

nutboi October 6th, 2005 20:01

i have the ksc. there's a japan version and a taiwan version of this gun. i use green and have had no problems with it. u can buy the magnesium bolt and bolt spring if u want to.

CDN_Stalker October 6th, 2005 20:01

Propane all the way! Mine ist still going after thousands of BBs through it, no problems at all (other than silly oil swelling rubber parts).

Xepharo October 6th, 2005 21:36

-_-
 
If it is a KWA one, then it should be installed with a reinforced magnesium bolt and bolt string already. Then it will be safe from using green gas ... propane.

If it is a KSC one... then you might want to double check it.


All times are GMT -4. The time now is 01:56.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.