Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)
-   -   G&G M1 Garand (https://airsoftcanada.com/showthread.php?t=170076)

Zab February 1st, 2015 23:25

G&G M1 Garand
 
Anyone have any leads on Canadian release date ? I know the production model has been released and have seen some UK site with it listed as in stock. Any info would be great... Thanks !

Flawless February 2nd, 2015 18:26

Do you know if it will be better than the ICS M1 Garand? I know the only difference is the mag capacity.

lurkingknight February 2nd, 2015 19:29

no ping, no care. :x

venture February 2nd, 2015 20:20

It is more expensive than the ICS model. Anyone know why?

Zab February 3rd, 2015 03:18

I owned the ics... it is horribly off as far as 1:1 scale. The weapon is twice as fat.. laughable huge sling mounts, huge butt plate that wrapes around, m14 modern trigger guard, huge space between gas tube and barrel and plastic huge mags that don't fit in wwii webbing.. lol the G&G will be 1:1 scale and is correct for that alone as a reenactor its worth the extra money

Zab February 3rd, 2015 03:21

And forget this ping stuff.. no one will make a skimishable weapon tgat holds more then 8 rounds and i don't wanna be looking for eject clips during a fight... find a murishin as a wall hanger fir a $1000 if that's what u want ;)

lurkingknight February 3rd, 2015 09:10

you can make it hold more than 8 rounds. Also the marushin doesn't ping either. It makes a poopy noise. Lol

Drakker February 3rd, 2015 11:52

All you need really is an extreme-fire computerized unit and a deal extreme 5$ micro-speaker. It'll ping just right. ;)

Flawless February 4th, 2015 00:22

Quote:

Originally Posted by Zab (Post 1932001)
I owned the ics... it is horribly off as far as 1:1 scale. The weapon is twice as fat.. laughable huge sling mounts, huge butt plate that wrapes around, m14 modern trigger guard, huge space between gas tube and barrel and plastic huge mags that don't fit in wwii webbing.. lol the G&G will be 1:1 scale and is correct for that alone as a reenactor its worth the extra money

Wow that's good to know. I was curious about the ICS one a while ago. I have WWII gear and a Thompson but I always wanted an M1 Garand.

Styrak February 4th, 2015 01:59

February. I can get it for you if you want one.

Swattiger February 4th, 2015 10:01

Quote:

Originally Posted by venture (Post 1931948)
It is more expensive than the ICS model. Anyone know why?

Because of the Walnut stock ?

Anyway, hopefully our Canadian retailers do not do the usual sky high mark up. It makes us look very dump.

Zab February 4th, 2015 16:12

Do you have a estimated price point.. nd i.only buy non orange barrels so no us imports

FirestormX February 4th, 2015 19:03

Quote:

Originally Posted by Zab (Post 1932226)
i.only buy non orange barrels so no us imports

Not all manufacturers will produce models specifically for the Canadian market. The US is a much larger market than Canada, so if you're only going to configure your factories to produce barrels and flash hiders one way, you're going to configure them in a way that will allow you to sell to the largest market - especially if it does not prevent you from legally selling to other markets.

Zab February 4th, 2015 20:25

G&G has canadian tailored weapons they will have two versions i kno for a fact and US is lower FPS.. ill hold out fpr the Canada market verdion thanks ;)

Zab February 4th, 2015 20:29

Not one of my G&G s has ir had a orange barrel and all say for canadian market sale only on all of. the boxes so I'm pretty sure I'm good


All times are GMT -4. The time now is 19:55.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.