Tm 1911 meu metal slide efficency
 

Anyone know the gas consumption of a tm meu or 1911 with a metal body kit?

6.4

I should be more specific. By gas consumption I mean how many mag(s) can you get per fill?

For my MEU with Guarder kit, it was half a TM 226 mag for a fill.
Your mileage may vary but TM guns with metal kits are very poor for gas efficiency.

That made 0 sense...

Don't most people top off anyways after a game? If you can squeeze one, I think that's good enough.

I know I'm just basically asking if people can go through an entire mag with a metal slide.

Sure; if you're good at it.

Depends on the metal slide set, the parts installed, who installs them, the temperature, the speed at which you shoot. You could have anywhere from 12-40 shots. So yes you CAN go through a whole mag with the proper parts installed correctly.. also ppl are giving you a hard time cuz this is a repeatedly asked question.. I suggest you use the search function since I only know these facts from reading which you are able to do also.

So if you are shooting fast like 2 or 3 per second in 65-70 degrees with good parts and installation could it go through an entire mag?

What parts do you recommend?

We unanimously and magnanimously agree on a full build from Brian.

And yes you can always go used if you can't afford new.

Who is this Brian ?

Here u go.. get age verified.. this exact gun with specs is built for 2400$ and there is video proof of him shooting 40 rounds on a mag fill.. these r the parts:

Tokyo marui 1911a1 base gun
- Dry Lube process (That's right, this gun no longer requires lubing outside of your green gas)
- NOVA kimber warrior kit - RARE (outer barrel has been replaced with an illusion kinetics outer)
- NOVA barrel Bushing
- NOVA slide stop
- NOVA Ambi thumb safety
- NOVA grip safety
- NOVA spring housing
- NOVA magazine release
- Real Steel VZ Frag Grips (tan)
- Illusion kinetics 3-hole adjustable trigger (the trigger pull is very small, ~3-5mm)
- Illusion Kinetics oval hammer set
- Tanio Koba twist barrel
- 9ball piston head
- Airsoft surgeon 1911 nozzle
- guarder 150% hammer and recoil spring
- firefly Recoil Spring Guide with Thrust Bearing for Marui 1911 Series
- ILLusion Kinetics Main Spring Plunger for Marui Hi-Capa & 1911 Series, Polished Stainless Steel
- ILLusion Kinetics Adjustable Solid Loop Trigger Stirrup, EDM Stainless Steel
- A+ Hop Up Rubber
- A-Plus Devil Strike Chamber for Marui GBB
- ILLusion Kinetics Hop Up Chamber
- ILLusion Kinetics Outer Barrel for Marui 5" Straight Barrel, .45 ACP with Chamber Indicator
- Straight 8 daysitters

Is there any way to make it cheaper lol? A lot? Also who is Brian?

Brian = illusion

Just get a kjw