Airsoft Canada - Help with hi capa

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Doctor's Corner (https://airsoftcanada.com/forumdisplay.php?f=18)

- - Help with hi capa (https://airsoftcanada.com/showthread.php?t=17613)

jStyL3z

November 5th, 2005 18:40

Help with hi capa

anyone noe why my hi capa isnt cycling...sorry i cant give any details about the problem...but it jus doesnt feed bb's into the barrell

Gryph

November 5th, 2005 19:12

It could be that the O-ring slipped off. Take off the slide and pull forward the nozzle, it should be in a groove. If not, it's been displaced and sitting on the metal assembly in the rear.

jStyL3z

November 6th, 2005 00:00

i think the o ring is fine, i have the tk piston cup in there....but ill give it a look

mcguyver

November 6th, 2005 00:05

what kind of hi-capa is it? some w.e. guns had a similar problem but it's not a seal issue, rather an alignment issue between the mag valve outlet and cylinder valve inlet.

jStyL3z

November 6th, 2005 01:45

its the TM hi capa 5.1

Gryph

November 6th, 2005 04:24

Quote:

Originally Posted by jStyL3z

i think the o ring is fine, i have the tk piston cup in there....but ill give it a look

Check the thread concerning TK piston cup failures, this might be the problem you're having.

http://www.airsoftcanada.com/showthread.php?t=17291

ILLusion

November 6th, 2005 14:35

Your muzzle's loading ramp could possibly be broken.

All times are GMT -4. The time now is 19:14.