Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Doctor's Corner (https://airsoftcanada.com/forumdisplay.php?f=18)
-   -   KJW M9 mag issues (https://airsoftcanada.com/showthread.php?t=184696)

Genitalthunderstorm August 30th, 2017 01:27

KJW M9 mag issues
 
Hello, I have a KJW m9 elite that is having mag issues. Specifically I bought 2 WE 52 round extended mags for it and they both wont fire with the KJW. The mag seats into the magwell just fine and when I pull the trigger a very quiet poof is heard. When I push the mag up it will fire and cycle properly. It seems like the mag is just a tiny bit too low for the striker to hit the valve.

Now before I get yelled at I did my research and have read that supposedly the WE mag and kjw m9 are compatible. From what I am seeing it should work but need to have the magazine sit slightly higher in the pistol.

Comparing the KJW and WE mags I noticed the KJW one has a bit less play and the valve has a larger striker face. When I swapped the kjw valve into the WE mag I got successful cycling about 70% of the time. An improvement but not enough. Any suggestions?

Also does anyone know a GBB whisperer near Vancouver? The m9 has been giving me issues from the moment I unboxed it and maybe some professional TLC is what it needs.

Thanks in advance

Punkrockjohn October 21st, 2017 08:40

Have you dropped the gun in sand or exposed it to any dirt from the get go?

Styrak October 21st, 2017 20:47

I would suggest you buy KJW mags instead.


All times are GMT -4. The time now is 10:37.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.