Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)
-   -   Battery (https://airsoftcanada.com/showthread.php?t=18551)

endLess December 6th, 2005 17:08

Battery
 
Hey guys! Its your friendly neighbour ENDLESS! I have one small question to ask. I bought this RC racer from Radio Shack and also a battery back with this expensive charger can i use that battery for my m4a1 ICS?

The battery is like new and its size, shape and connection looks exactly the same as the guns connection and batteries.

Kid December 6th, 2005 17:12

the battery is 4 cells wide and 2 cells long, right? If so, I use one in mine.
I did have to do some mods to make it fit through... want a picture? :-D
Also modded it to be 8.4v instead of 9.6v and bought a new connecter for it... haven't got the connecter yet though, just taping the wires in, the connecter sizes are different.

http://that-geek.is-a-geek.com/mp5/m...l/P1050273.JPG

What I did was cut out the one cell, stuck some wire in there to connect the two cells that were then not connected.
Then, i cut it down the middle and shaped it into a V then taped it up, first replacing the connecter that was not too short with some copper wire.

Then, I found the connecter does not fit, so I cut it off and am now just sticking the wires in.

Make sure to get everything in place... haha, works great now, but my first game... ended up using a Crosman springer. :shock:

endLess December 6th, 2005 17:37

Quote:

Originally Posted by Kid
the battery is 4 cells wide and 2 cells long, right? If so, I use one in mine.
I did have to do some mods to make it fit through... want a picture? :-D
Also modded it to be 8.4v instead of 9.6v and bought a new connecter for it... haven't got the connecter yet though, just taping the wires in, the connecter sizes are different.

http://that-geek.is-a-geek.com/mp5/m...l/P1050273.JPG

What I did was cut out the one cell, stuck some wire in there to connect the two cells that were then not connected.
Then, i cut it down the middle and shaped it into a V then taped it up, first replacing the connecter that was not too short with some copper wire.

Then, I found the connecter does not fit, so I cut it off and am now just sticking the wires in.

Make sure to get everything in place... haha, works great now, but my first game... ended up using a Crosman springer. :shock:

LOL! nice job kid thats what i will probably do for my first battery! hahaha! lol nice job!


All times are GMT -4. The time now is 00:08.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.