Ares striker mod thread
 

So I did some searching and I couldn't find a thread with striker owners. I just wanna see what everyone is doing to their strikers other than just slapping an uber edgi kit on.


For me I'm mainly stock with a pink maple leaf autobot bucking and I shaved off the stock built in nub and placed a custom cut flat nub. Shooting 1.8j on .38 +/- 1fps

I'm currently using mine for CQB. Shoved a M90 into it (so it shoots like ~350).

Other than that I put a Barska 1-4x short dot onto it.

My planned things to do include a chrome/carbon fiber short barrel (310mm) with the same length inner. I'll also put a flat bucking / nub into it when I do that short barrel mod.

I plan to use this as a CQB meme, so I'm not putting that EDGI kit into it.

I have an action army hop Up and inner, barrel spacers. Laylax bucking. Madbull m150

- ED1 Cylinder (sorbo on the cylinder head) + Trigger kit
- Maple Leaf Autobot, 60º
- Stock Hop, with teflon taped Maple Leaf hop arm (Type B)
- Stock Spring, doing about 278fps +- 1.5 fps with 0.3g, (Indoor setup, since I mainly play indoors)
- 2 part expanding foam barrel "spacer"
- Short barrel + CJ inner


It's all sorts of fun indoors with a short barrel setup, plus you can slap a suppressor on pretty easily without going excessively long.