Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Upgrades & Modifications (https://airsoftcanada.com/forumdisplay.php?f=24)
-   -   KJW Para accurate barrel recommendation. (https://airsoftcanada.com/showthread.php?t=19544)

RaiNe January 8th, 2006 00:11

KJW Para accurate barrel recommendation.
 
I have a KJW Para Ordnance and I have been meaning to get an accurate barrel for awhile now. I've searched through most of the overseas retailers and they don't seem to sell anymore 5 inch accurate barrels for KJW/WA guns. I was originally going to go with an Sheriff 5 inch LRB barrel but those have been out for awhile or just extremely hard to get.

Would the
NINE BALL 6.03mm Inner Barrel for Marui Hi-Capa 5.1 be compatible for the KJW Para? Or what would you recommend?

Gooseman January 9th, 2006 00:09

Bad news for you buddy. As far as I know, no one makes a KJW accurate barrel (or hopup chamber) and the WA barrel system is not compatible with the KJW system (from what I remember) nor is it compatible with the TM Hicapa system.

RaiNe January 9th, 2006 14:53

I always thought WA parts were compatible with the KJW Para since its based off a WA Para but I know Hicapa parts were not compatible, was just throwing it out there just to see if there was any possibility it might fit.

Grim Fandango January 9th, 2006 18:31

WA parts are compatable with KJW parts. But don't get any sheriff parts. I found out that sheriff parts don't fit properly on a KJW P14.


All times are GMT -4. The time now is 23:03.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.