Inside of TM m4 mag
 

Hey guys. i bought an extra mag for a TM M4 but it doesnt feed right. alot of missfires. i was wondering if anyone could open up there mag or give me a link that show what the insides are like. thnks

http://www.airsoftplayers.com/m16a2/a2_9.jpg

Right click, save as to your desktop, then open with whatever you like and zoom in.

What Stalker has posted is a regular 68 round mag. If you have a mid-cap (@130 rounds) it will look the same, however they are prone to miss feeds due to their double-stack nature.

Could also be caused by a sticky hop up rubber. Have you evern put a drop of so of silicon oil in the feed nozzle? I've found that the rubebr gets sticky once in a while, causing misfires.

Might not be a bad idea to put enough BBs to fill the mag, into a bowl, put a few drops of silicon oil on them and mix. Then load all those BBs into your mag. That'll get a bit of oil all around the inside of the mag, might ease the misfiring issue as well.

Would help if you say what mag you bought for it, brand and lo/mid/hi.