MGC P7M13 Cocking Lever Stuck Depressed, and Slide Not Locking Back
 

Please note that I already posted this up on classicairsoft.net

Well, today I decided to fire my P7 in the house. I fire away, all seems well, then I notice that my rear sight is a bit wobbly because the screw was loose, so I screw it back, seems ok now. Anywho, I fill up another mag and then I squeeze the cocking lever, but then I was gonna try shooting at something else, so I decide to decompress it.

Lever doesn't come back up, so now I'm like :banghead: . So I check it over by removing the rightside hand grip.

This is what I discovered:
Note the two metal pieces that do the work
1. This is my P7 with the cocking lever decompressed.

2. This is my P7 with a depressed and stuck cocking lever, note how the metal pieces are stuck

---

After some fiddling I decided to empty the gas in my mag because it could take awhile to fix this problem, so I fire off some shots, and I notice that I keep firing even without rounds in it, so the slide doesn't lock back basically. I figure at this point that the two problems are linked...

Any help would be GREATLY appreciated.

-Peter

Anyways............... that's weird, I stripped down the whole thing, and put it back together, and now it works again perfectly................ weird. So I have no solution to give, I must have missed something when I put it back together.

the important thing is now it works