Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Gear Discussion (https://airsoftcanada.com/forumdisplay.php?f=26)
-   -   Battery Help (https://airsoftcanada.com/showthread.php?t=25909)

ZombieComplex July 5th, 2006 17:12

Battery Help
 
I recently aquired a Mini 8.4V 600mAh along with my new TM M4A1. The charger that i bought says "7.2 VOLT, 2-3 HOUR CHARGER" but under the output heading on the charger it says "Output:P DC 9V 700mA". So i decided that i would charge it based on the mAh, so 600(the battery)/700(the charger) * 60 (minutesin an hour) = 52 minutes. At first this appeared to work as the gun fired , but after 200 bb's (the ones that come with the gun) over a 24 hour period the gun failed to fire. the issue was the battery since i put my friend's battery in my AEG and it fired fine. What did i do wrong with the charging?!

Greylocks July 5th, 2006 17:58

If you read the Information section, there's several threads about batteries, their care, chargers, etc.
Try it.

Mantelope July 5th, 2006 19:25

See how the battery is 8.4V, and the charger is 7.2V? Charger's not delivering enough potential to charge the battery.

ZombieComplex July 6th, 2006 16:52

ok ill go have a better look around i guses, but could someone tell me how long or how mahny rounds a 8.4V mini battery is SUPPOSED to last?

Mantelope July 6th, 2006 20:27

Probably around 600-1000 in a stock gun.

Greylocks July 6th, 2006 21:14

We cant because it varies from gun to gun, charge rates, quality of the cells, type of cells, quality of the ammo, motor and electrical setup of the gun, etc.


All times are GMT -4. The time now is 03:28.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.