Cocking lever on TM G36C
 

Has anyone ever changed the cocking lever on the TM G36C from plastic to metal? Is this a big job and where can I find instructions on how to do it?

its easy,
pull the gun apart,
remove the pins holding the hopup and barrel assembly out,
unscrew the two screws attatching the lever to the dust cover (careful not to lose the grommets around the screw holes)
pull lever back, pull up and slide forward (careful the spring might launch it)

depending on your kit, you may need to reuse the spring, dust cover, grommets and screws.

place spring in rear of lever, slide in.
place dust cover in, place grommets around screw hole in underside of lever
screw together.
reinstall internal skeleton via pins,
reassemble body

voila

if your still having stress the first part of this tells you how to do it.

What is the best replacement cocking lever and where can I buy one. I did see one on Redwolf I think it was from G&P. Is this the best way to go?

pm jugglez he is a un company dealer, thats where i got mine. btw i got the complete one with the metal lever, tab, spring, replacement screws and grommets and replacment dust cover, all are better quality and heavyer guage steel. go to their website and type in g36, drool, chose what you want and pm him with a list! but just dont waste his time.