KingArms L250 Laser
 

Ok, this is probably a major n00b question, but I really can figure out how to adjust the windage/elevation on this unit.

There are two small alen key screws on the side, moving them dose nothing, there is also another 2mm alen key screw on the body, when it is loosened the laser dosent work. Also the brass ring around the eye has a slot for what looks like a flat screwdriver..

Generally, tightening allen key screws will push the laser in that direction. Ie. Tightening screw on right side of the laser will cause laser to aim farther left.

Clamp it down, turn it on, start adjusting the allen screws.

Trying this hand held or not on a steady surface is not effective (you could also mount it to your gun, and line it up with your irons). The L250 laser is adjusted via those allen screws.