Asahi MP40
 

Hey guys I was wondering if anyone knows where i can get a power source for an Asahi MP40? Any help would be appreciated. :)

ask the guys at www.ww2airsoft.com

Some guys got Asashi guns (Gordak) and other external tank guns, they might know good sources

Thanx man,,Ill look into it,but someone on this site mentioned to keep away from this WWII guys. R they the same as WWII Armory?

Ahhhh,,k,,I just checked out the site. Lol,,guess i should have checked it out before I posted. Lol.

No worries.

I know what you mean.

Don't trust www.wwiiguns.com thats the scam website.

Ok dude,,Ill keep that in mind. Too bad though, cuz they have soem awesome pieces. Good thing I managed to get my k98's, mp40's and mg34 before things really got tight with all these screwed up laws.

http://www.classicairsoft.net is a good place too, though a bit on the slow side.

EDIT: Just wanted to clarify the "slow" comment, lots of good content but there just aren't many posts per day. ;)

Sure, it's cheap to sell you something they don't intend to deliver :)

Yeah,,ur like the 2nd guy who told me that. I have been out of airsoft for a while, only time i got ripped was once, oddly enuff by some guy here in Canada,,,uts pretty messed up when people pretend to run a respectable business then just screw people over. These people should be hunted down and shot like rabid dogs.

If your system is external air like I believe it to be then get yourself either a paintball CO2 or HPa tank and a good,consistent, reliable low pressure regulator like a Palmer's Stabilizer with low pressure spring pack. The information on the rest of the hosing, quick connects and other doodads can be found at the classicairsoft site noted in the post above.

I have already tried getting that,,the problem is the tube that is connected to the gun does not have any sort of connecting valve, its just a tube, Thats where the problem is, I have tried doing some Macgyverisms on it, but no luck as of yet.

You need to go to your local pneumatics store and look for some 6mm or 1/8" hose adapter. You can get a straight through or get some quick disconnects to do it. If all else fails i have an extra one i can sell you.

Ahhh,,thanx dude,,ill go check out any Ronas or Home Depots, or a/c stores.If all else fails,u will probalby be hearing from me for that purchase,,lol

Don't bother with Home Depot or Rona. They won't have it. You need to use your yellow pages and look up pneumatics suppliers. It won't be hard. Otherwise, around the Toronto and London areas there's Deetag Ltd where I got my stuff. You just need a 6mm QD male and 6mm QD female along with some other adapters and 6mm coiled hosing. All in all, the little push connects, QD and hosing should cost you $40 CAD or less after taxes.

Great,,thanx man,,Ill look into some stores over here, if not Ill try contacting Deetag.