Radio programming KYD
 

So I've had this KYD radio model KD-3188 for about 2 years now and I thought that it would be a good idea to finally figure out how to program this thing. Trouble is the instructions that came with it are about as useful as an ingrown toenail.
Does anybody out there have an easy how to guide on programming these radios with standard "walkabout" freqs or have any experience that they could write down for me.
I've done the search but really didn't find anything to useful.
Thanks for the help and if you have any suggestions such as another radio or a radio for sale that is programmed with the standard fregs that you would find on a talk about please feel free. to let me know
Jakster

http://img.alibaba.com/photo/1061862...r_Kd_3188c.jpg

someone from my old team wrote this....i take no credit...
hope you understand french...
-------------

Voici les frquences FRS:

Ch Service Frequency

1 GMRS/FRS 462.5625
2 GMRS/FRS 462.5875
3 GMRS/FRS 462.6125
4 GMRS/FRS 462.6375
5 GMRS/FRS 462.6625
6 GMRS/FRS 462.6875
7 GMRS/FRS 462.7125
8 FRS 467.5625
9 FRS 467.5875
10 FRS 467.6125
11 FRS 467.6375
12 FRS 467.6625
13 FRS 467.6875
14 FRS 467.7125
15 GMRS 462.5500
16 A GMRS 462.5750
17 GMRS 462.6000
18 B GMRS 462.6250
19 GMRS 462.6500
20 C GMRS 462.6750
21 GMRS 462.7000
22 GMRS 462.7250

Comme vous le savez, vous devez mettre les SQL en 12,5hz Pour cela, appuyez sur fonction puis * . Avec le twist boutton ENC/SQL, choissisez soit 10,12.5 ou 25hz dans notre cas, c'est le 12.5hz qu'on a besoin puis appuyez sur dial. Composez les fréquence ci-haut puis mémorisez les.

Pour les mémorisez,

Tapez voutre fréquences voulu puis pesez fonction, avec le Twist button ENC/SQL, choisir le numéro qui convient (numero 1 pour la fréquence 1 du frs ) puis pesez scan pour mémoriser. Pour avoir acces a votre mémoires, pesez scan 1 fois et utiliser le twist button pour naviguer d'un fréquence a lautre sinon enfoncer scan pendant 3 sec pour faire un scan complet des fréquences.

Good start.
Merci Rat

I cant read french! I would like to know also!

no time to translate now...maybe tomorrow if time permits....unless someone does it before me....

No rush! :P take your time... Thanks for the offer though.

as promised:
---------

As you know you must put the SQL at 12.5 Hz. To do this, press on the FUNCTION button and *. Twist the ENC/SQL knob and choose either 10, 12.5 or 25 Hz then press DIAL.

To memorize the frequencies:
Type in the frequency, then press on FUNCTION. Twist the ENC/SQL knob and choose the number you want to lock the frequency to then press SCAN(i.e.: number one for the first frequency and so on…) To access the memory, press SCAN one time and twist the knob to navigate between frequencies. If you hold SCAN too long you will just cycle through the frequencies.

Perfect,
I'll try this out tonight

I was thought it was Backdraft.

He have the same details in our team forums.

We should sticky it in the gear sections.

could very well be...i had copied and pasted it into a word document....thought it came from one of the DOW....my bad....

made a sticky 2 years ago you nuts!...diff section though..

http://www.airsoftcanada.com/showthr...&highlight=UHF

All good, radio prgrammed and working. Thanks for the help with the instructions Rat they where just what I needed.
Thx
Jakster

Re: KYD Programming
 

Hey Jakster,

Don't know if you still have this bit of kit, but unless im mistaken there was no mention of CTCSS codes. Do you know how to set this on the KYD-3188?

Thanks.

(yes i have read the UHF Radio Users sticky, I also dont have the user manual for this radio)

I have the full manual, give me your e-mail address in a PM and I'll send it to you. Never heard of what your looking for but it might be mentioned in the manual somewhere