Picture request: P90, ACOG, Docter sight
 

Greetings,

I'm feeling the urge to start a new chairsoftin' project. I'd like to use an ACOG/Docter sight combo, and I don't want another Armalite.

I've been thinking about a P90, but I'm having a really bad time picturing the optics on this gun. So, if someone has a P90 and an ACOG, could you take a picture?

Or maybe someone could photoshop it. I'm only good with MSPaint.

Thanks in advance!

Up... Please?

I have this G&P ACOG/DS combo mounted on top of DTP FN Herstal triple rail mounted on a GB-Tech metal upper receiver. The resulting combo makes it a bit taller than it would normally be on a Tokyo Marui triple rail upper receiver.

http://www.pbase.com/image/78808134/original.jpg

http://www.pbase.com/image/78808135/original.jpg

http://www.pbase.com/image/78808137/original.jpg

http://www.pbase.com/image/78808138/original.jpg

http://www.pbase.com/image/78808139/original.jpg


Personally, I prefer an Aimpoint on the setup. It sits lower:

http://www.pbase.com/image/78808140/original.jpg

http://www.pbase.com/image/78808141/original.jpg

That ACOG looks WAY too high on that P90!
Not that I know much...

Hey brian, where did you score that killflash?

An EOTech works alot better with the P90.

It IS way too high, even to the point of uncomfortable for a proper cheekweld. However, if you're wearing a full face mask, this setup would actually work well, since you can't get a proper cheekweld when wearing a full face mask.

I find my EOTech 551 also sits high on my P90. It's only a *tad* lower than the ACOG.

http://www.wgcshop.com/pcart/shopper.php?itm=GBT-FLKR01

Really? I felt it was just right on the standard marui rail. I'm a little too big for P90s though...

Aimpoint on P90 work great. But an open dot or holowsight (eotech) would be much better since the Aimpoint is obscuring a lot your vision with it's big frame. When doing close CQB, the P90 is great and it ride along close to your face all the time, so habing a non obscuring optic is very rewarding.

*splurge*

I really love the look, but that does look uncomfortable.

Thanks for the pics!

Again, keep in mind that my particular set up does cause the top rail to sit a bit higher than a standard triple rail receiver.

Any pics of a EOtech on a P90?

Yeah :p , I just noticed your rail looks about .5"-1" higher.

http://www.pbase.com/image/78851507/original.jpg

http://www.pbase.com/image/78851508/original.jpg

ahh.. I see what you mean. It does seem a tad high.