CA25 Modification
 

Ok so with my new CA25 i was wondering something. How can i change the trademarks on it for the real one's. Is it possible to get the CA one's taken off and new one's etched? Or does the following will fit on the CA25?

http://www.uncompany.com/pageproduct...sp?prodid=5858

I think you can probably get them of with some krylon paint as for getting new one, personally i would probably try to make a stencil with illustrator or something like that but i never try it maybe there is some other way.

They are laser etched.

Not to burst your bubble or anything, but you did notice the pricetag on that receiver was US$566, and that's not in Canada yet, right?

If you're that keen on going down this route, sell the CA, and get the G&P one, or build your SR25 from scratch using aftermarket parts (the G&P receiver comes with a mechbox, so you're missing a stock, grip, motor and front end). It'll probably be cheaper in the end.

As for painting your own trademarks, you can try... but if you don't really know what you're doing it'll look like shit. (hint: you most likely want to silk screen it)

Your best bet is probably just to cover the whole thing up with a nice camo paint job. Check out some real ones for ideas:

http://www.knightarmco.com/sr_25.html

That camo job is just... uber sexy O_O But i have zero paint skills. Or paint for that matter :P

Check with the locals, I've seem some insane paintwork done for some of the DOW guns and others.

just buy krylon and test you skills on cardboard first, that how I learned my skills for my m24

http://www.airsoftcanada.com/gallery...2/DSCF0012.JPG

Hows the wear on krylon painted guns?