Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Doctor's Corner (https://airsoftcanada.com/forumdisplay.php?f=18)
-   -   SR motor (https://airsoftcanada.com/showthread.php?t=49266)

El Cactus Loco December 16th, 2007 22:56

SR motor
 
yes, so, my SR originally came with a G&P M120 motor, but for some reason, now the pinion gear just spins about the drive shaft. not the pinion so i need a new motor. i tried my friends TM EG1000 but it was too weak to crank the gears. i dont think that this is the long v2 gear box in the normal SR-25s as is only has 4 screws along the top of the GB (not 5) and it has the slots cut in it at the rear to allow the upper reciever on a M4 to rotate up (unlike the long one). ANYWAYS, the motor. i dont want another G&P one, because i dont want to have to deal with this pinion gear thing again. in the future, id like to upgrade to a set of helical gears, but id like to have a low ROF but snappy trigger response (is this even possible, or an oxymoron?) any motor recomendations?

Syn December 16th, 2007 23:37

I don't have a systema magnum but can give link to reviews for it. THere are pros and cons for it:
http://www.airsoftgi.com/product_rev...oducts_id=1841

low ROF but snappy trigger response. -->THe motors I read about the ROF and snappy trigger response are proportional, mostly because the motor is much more efficient and powerful.


All times are GMT -4. The time now is 16:57.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.