Creating my own gun problem
 

I bought a g&p metal body and i got a couple of problems

1) The charging handle is in but how to i put that metal slide thing in that pulls back with charging handle..

2) My pins from my echo 1 do not fit in the G&P body?

3)How do i do the wiring. to get it to the front where the battery box is?


i'm creating my gun from scratch and almost done

1) All the G&P guns I've seen dont have the cover that moves back with the charging handle, it's a pretty useless piece anyway since your dust cover is always closed.
2) Of course not, G&P is awesomeness designed in such a way that it's not compatible with lower end pins
3)you have to re-route the wiring to the front of your mechbox (requires opening your mechbox), then around the hopup chamber and through a slot on the bottom of the outer barrel. If you don't have that slot you can't run the wires forward.

just had this problem dont force anything be gental.also when routing your peices make shure you dont mess with the wires and make shure they wont slide up against the reciver or they may get pinched. and also if its an echo one gear box. you might find its better to go order a new jg v2 gear box form hang its 95 shipped with motor and you can get it with front wireing that way it saves that hedach. i sweatr though i think the jg mech box is better than the echo 1. also the body pins you should have got a replacment set when you got your reciver.

Dude, where do you live?? 'Cause there is probably someone who knows what they are doing that lives close to you. I know of 3 people in/around the GTA area (if that's where you happen to live).

SHA DO

It's the exact same thing except Echo 1 does the shimming and overlubes it lol
Buy a G&P V2 mechbox shell, that way you get a guarantee that the G&P shell will work in the G&P body. Flawless logic right?
And on top of that you get a real sturdy and reinforced mechbox shell that you won't ever have to upgrade!

Will the systema gearbox fit in there..with the systema magmum motor and all inner barrel and hopup

Yes if u go systema it'll fit in there and all that Jazz...
Nice setup to.. I love the mag motors

i cant wait to do that setup its going to be sick