Wood stock cracked
 

After a rainy day game,i found out the gun's wooden stock had this 6 cm long and .7 cm deep crack!
is there any ways to fix it at least make sure it wont crack more : (
should i drop some super glue into the crack?

Depending on the location, you could put in some wood/carpenters glue and clamp it.

I'd suggest actual wood glue, not superglue, and a good clamp or vise.

Place something (piece of plywood, strip of rubber, several layers of shipping cardboard) between the clamp's surface and the wood to prevent leaving marks.

Leave it in there long enough to dry fully (follow directions that come with the glue).

And apply a wood sealant/waterproofer on the whole piece after you're done.

edit; beaten to the punch

Saw dust and wood glue would also work. JB weld will hold up as well. When finish, use some furniture wax to refinish th entire stock.

Much thx guys!heading to rona right now for the wood glue and proper tools : )!

Curious, what AEG and/or wood kit did that happen to?