KJ works G23 metal slide
 

I just got this from BBS.The gun wont reload after shooting, i have to rack the slide to chamber a round.The slide seem's to stick at 1 inch past the barrel.

You will most likely need more info but as of now i dont know what i can add so please ask me.
Thanks for the help.

update
It looks like its the cylinder is sticking i'm going to do a full take down and see if a spring is the problem.
If you have any idea's let me know

OK so i did the take down.KJ works g23 is real simple but for the life of me i can see whats wrong.The cylinder valve spring is fine piston cup is good so the problem is not there.
I put a recoil spring from a stock GEN3 TM G17 and it seemed to work,it was cycling good.
What i dont understand is why a stock spring for a G17 plastic slide would work on a stock metal G32
Just to add that the slide seem's to be rubbing on the outer barrel at 1 inch past the frame.
Any help would be nice

You can bring it over sometime Dave and I'll look at it for you. Gives me an excuse to get out the Dremel!! :D

yeah that "sticky slide" is the issue that i stated in the sale thread. not sure whats causing it. It shot fine for all the 100 rounds i put in thus far till i sold it. Matt491 is the original owner, ring him up; maybe he can shed some light.

Thanks Mac i dont know what i would do if i did not have you around i'll give you a call this friday