RDS riser mount?
 

Hey there. I have two of the same RDS, and on both my P90 and my AUG, the RDS sits too low when I have my mask on to use. Is there any simple or cheap ways of raising my RDS's to make them usable?

I was thinking a 20mm railed riser of some sort, but I not exactly sure.

Solutions?

Got three!

Cool but out of stock
http://www.redwolfairsoft.com/redwol...l?prodID=13663

Really high, but again out of stock
http://www.redwolfairsoft.com/redwol...l?prodID=13667

Instock! Not a bad price and if it were an AR you'd keep your rear iron!
http://www.redwolfairsoft.com/redwol...l?prodID=11107

First one, maybe, looks like a decent raise.

Second one, not bad, but expensive.

Third, not bad but I dunno if that's high enough?

I was thinking of maybe this:

http://ebaybanned.com/product_info.php?products_id=919

or this:

http://cgi.ebay.com/ACTION-QD-Higher...QQcmdZViewItem

WAY cheaper.

Whaddya think?

http://cgi.ebay.com/ACTION-QD-Higher...QQcmdZViewItem

That one.

How much rise is that? An inch?

If that... its prob only 1/4 to 1/2 inch but that alone is quite a bit of lift. What optic is it you have? Maybe a canti-lever mount would be best for you?

Madbull makes a "RIS fixer" basically a riser.

It might look better on an AUG and P90 since one end is made angled:

http://www.madbullairsoft.com/Englis...p_image&pID=50

It also is very short, so it should fit properly on the P90

This is what it looks like. I need an inch or more raise on both guns.

http://i62.photobucket.com/albums/h1...k/IMG_2179.jpg

That's awfully high up if you need that much of a riser.

Maybe invest in a different mask, or go without a mask?

Grr. It's a paintball mask, so goggles and face protection. Maybe I'll just have to go without RDS's.

I agree.

Your mask is the problem here.

why dont you put your RDS on the side rail?

What about trimming the mask at the cheek area.

That would just open it up at the cheek area. It's not that thick.

And yes I thought about mounting it on the side as a joke, but it might actually work. Can't do that for the AUG though.

Figured it out. Ripped apart my mask. Now I can use goggles for outside and use my RDS's, and I can also attach the front mask part for CQB and not use RDS's.