Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Doctor's Corner (https://airsoftcanada.com/forumdisplay.php?f=18)
-   -   Superlube where to buy? (https://airsoftcanada.com/showthread.php?t=60329)

pawscal June 4th, 2008 13:39

Superlube where to buy?
 
Ok I searched and cant find a place that carrys this stuff. Who carrys this stuff?

Gerkraz June 4th, 2008 13:44

Ask Aqua :O

Syn June 4th, 2008 13:48

Canadian tire near the automotive section had some.
The grey can spray and the tube.
http://phl.freeshell.org/goodstuff/superlube.JPG

What parts in the gear box are you going to use this for if you don't mind me asking.

pawscal June 4th, 2008 15:44

gears and compression parts, pretty much everything, apparently its the bomb. Im tired of useing lithuim grease the stuff looks like its 20 years old once i reopen the gearbox

DENZILDON June 4th, 2008 15:54

Question, is this ok to use on GBB? The silicone spray at lease?

pawscal June 4th, 2008 16:05

They use no pretroleum in their products and they use silicone so I would assume it safe to use.

Syn June 4th, 2008 16:08

What do you guys think about this for cylinder lube?
I have 2 cans of this I use for saw blades http://www.jigaloo.com/ca/e_what_it_is.php

"It’s a dry silicone-based lubricant that, unlike any other lubricant, contains no oil, grease, wax, petroleum distillates or detergent, so it doesn't stain or stink. It stops squeaks, un-sticks just about anything, protects against rust, and is an exceptional water repellent."

I'll spray some on a spare rubber oring and check if it eats it before I try in cylinder.

pawscal June 4th, 2008 16:11

prob too thin i think

Syn June 4th, 2008 17:06

Quote:

Originally Posted by pawscal (Post 734840)
prob too thin i think

Yeah you're right.

The silicone I have now needs to be just a bit thinner, too pastey currently.

demco11 June 4th, 2008 18:12

T7

TokyoSeven June 4th, 2008 18:22

If you cant find it at Canadian Tire, Rona or home Depot. Hit up some auto part places like part source or something.

KhaosGott June 4th, 2008 18:43

So, this is okay to use in the mechbox and spray in the barrel?

CDN_Stalker June 4th, 2008 19:07

Am surprised no one has pointed out that Ronan increased his post count by one with his useful answer.

Renegade) June 4th, 2008 19:42

Quote:

Originally Posted by CDN_Stalker (Post 734974)
Am surprised no one has pointed out that Ronan increased his post count by one with his useful answer.

Took note.. haha

On a usefull note, I have a tube of this stuff, got it from the ASCA boys when it was up and running, stuff works wonders for gearboxes and I use it on the GBB's some too. I would also love to know a source for more, as I am squeezing the final bits out of my tube as it is..

Syn June 4th, 2008 20:26

If all else fails you can always get it from ebay but shipping cost might be high.
http://search.ebay.com/search/search...ase&category0=



All times are GMT -4. The time now is 03:01.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.