AGM M14 Dissassemble?
 

OK ,I just aquired this M14 from Gunk,there ins't manual
for it,I was trying to figure out how to open it up and
check over the mechbox and connections.All I have
figured out so far is the trigger guard and front sight.
I found a lot of threads on how good it is or crappy it
is,read some reviews but no strip down manual.

Please help,I want to try it out at flagraiders this weekend.

www.mechbox.come have an M14 disassembly / reassembly guide.

Is that just the mechbox?,I haven't figured out how to get to it
inside the gun.

You didn't figure out how to get the trigger guard off!

That was my fuck up! :p

(and at least you don't hafta worry about the rear sight ;))

And still looking for that other mag... I'm thinking my cat has a stash of my shit somewhere inside a wall or couch or something...

That was the vid I was looking for CM,Gunk,I did figure out
the trigger guard and the front site removal,but that is all.
I think the mag is not working right though,feeds sometimes,
then 3 or 4 rounds or non.I held it upside down and it fired
perfect.

Thanks CM

Is it a ver.7 in the M14?.I'm trying to find a guide on the mechbox.
Mechbox.com didn't have it.I am trying to get the semi fire action
working.I have auto only at the moment.Would it be a mag issue
if I get no rounds then 4 rounds then 1 ,then 3 non then 2 or 3?.
Works all the time if I hold it upside down.

probably a mag issue.

try taking a handfull of bb, oil with some silicon oil in a plastic bag, then fill the mag with them.

empty in the bag and repeat process.

should solve the issue.

I'll give that a try on the mag problem. Thanks

Is the M14 a ver.7 Mechbox?.

When you have a feed issue, oiling the mag is usually the first thing you do to troubleshoot the feed problem. So far in all cases with me, it's solved the problem.

As for mechbox version, I THINK it's a V7, but I'm not sure. I have no experience with the M14.

I'm trying to find a mechbox diagram to work on the selector switch.
Mechbox.com changed their site,and this loaner pc dosen't let me
use their search button.The darn thing is stuck on auto fire.The
switch moves the parts but nothing changes in terms of select fire.

Nice find:D .All I found was sites selling guns or I couldn't display the site.
Thanks.

Well I tried the oily bb idea,well I got about ten or twenty rounds
out before the gun stopped working,the motor turns,the gear the
motor is attached to turns both ways as the anti reversing latch
is off the spring. here is the picture of the latch,I think I am over
my comfort level at the moment for working on this mechbox.

[IMG]http://i40.photobucket.com/albums/e2...8/100_2430.jpg[/IMG]

Man thats alot of peanut butter in there might wanna clean it out when ya get it apart just my opinion

Are there any guns doctors near guelph?,I need my AGM mechbox
rebuilt.I might as well up grade now since it doesn't work.