G36 Hop-Up problems
 

Ok so last time i went out bb's were spitting out about 10 feet out of my barrel, at first i thought it was some sort of air seal issue but after taking apart my G36 ive noticed a bb quite harshly lodged in the hop-up. any thoughts or suggestions as to what has happened? also, when looking at the side of the cylinder, if i can see into it from the side to the other that would imply the spring is compressed? if so im assuming thats bad lol.

UPDATE: Well after taking a closer inspection i realized that the whole inner barrel is full of bb's, there has been a G36K outer barrel kit installed (that is actually too big for the threads on the gun) so ill take that off and see if that changes things

The spring being compressed would be a pretty bad thing. Just hook up your battery (make sure it's charged) and cycle it a few times. That will decompress your spring and should be done before storing your AEG.

Your hopup/BB jam issue could be related to the hopup being turned up too high or the nub not being in properly. It's a little weird to have your inner barrel filled with BBs though and the outer barrel really shouldn't have anything to do with it.

I tried tipping the gun down to let the bb's fall out but they didnt until i took off the barrel extension so that at least played a part in the problem, ill do some test firing tomorrow