Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)
-   -   Need Assistance Please (https://airsoftcanada.com/showthread.php?t=67527)

innof September 18th, 2008 11:20

Need Assistance Please
 
Hello to all. I'm new here and already have a problem :banghead: I recently acquired an M15A4 Classic Army by ArmaLite and a friend recommends that it is a good idea to have the gearbox lubricated. However, when I get it back and re-install the unit it appears to be jammed; being a stubborn mule, I keep trying to engage it and now I think I may have messed up the motor too :banghead: :banghead: :banghead: :banghead: What a start to this adventure! Anyways, given my very imited knowledge as well as experience, can anyone here please recommnd a service center where both of these items (gearbox and motor) can get proper attention. Thanx Very Much. Regards.

Jimski September 18th, 2008 11:24

hellowelcome
fill in your profile so people know where you are.
then you'll find people near you to help you.

Crunchmeister September 18th, 2008 11:28

"If it isn't broken and you don't know anything about it, don't fuck with it" is a rule to live by. There's no reason a stock Classic Army gun should need any servicing out of the box.

So how about just going back to the person who did the work and explaining it. It worked when they received it. It should be working when they give it back "repaired".

And you didn't blow your motor. You probably just blew your fuse.

If you want to do it yourself, go to mechbox.com and watch some videos. Armalites are some of the easiest guns to work on.

Jimski September 18th, 2008 11:37

Quote:

"If it isn't broken and you don't know anything about it, don't fuck with it"
unless you like to learn things and don't mind taking risks :)

innof: test the motor direct to a battery.does it work?

innof September 18th, 2008 11:51

Wow, Thanx Very Much folk for all of the prompt replies. Just to clarify a few points: The gun was not "brand new" out of the box but very lightly used by a local - I actually live in Montreal. My buddy swears that he re-assembled the gearbox exactly as it was but obviously this can't be accurate since it ain't working like it should. Also, I had no clue whatsoever that the motor is actually fused (where is the fuse?). When I apply power directly to the motor leads sometimes it spurts ever so slightly but most of the time nothing at all. Are there actually service centers here in Quebec since I getting the impression that this hobby is a little taboo.... :cool:

Drache September 18th, 2008 11:54

the fuse will be located somewhere between the battery and the mechbox. Just follow the wires from the plug in from your battery back towards the mechbox until you come to a black or clear looking tube. Inside should be the fuse.

BBS September 18th, 2008 13:10

try www.mechbox.com they have some general and specific-to-model guides about gearboxes

Jimski September 18th, 2008 13:32

mmm,. you're sure the battery is charged? positive?

Quote:

Are there actually service centers here in Quebec since I getting the impression that this hobby is a little taboo....
yeah, service center I dunno but some people definitely fix them in mtl

Ktown Militia September 18th, 2008 13:45

good advice so far. Find some one who will take the time to show you proper assembly and disassembly if possible. that is how i learned. i thought i knew how to do the same thing and well, ktown=fail first time. then a local gun doc walked me through it and BAM!, easy as pie. All else fails, i guess your gonna have to do some hard research or pay someone to look at it. Good luck!!:D

innof September 18th, 2008 16:31

Very good info. fellows, so Thanx. Unfortunately, I followed the leads carefully for their entire length and no fuse anywhere..... look slike I may have cooked the motor by forcing it (damn!). Can anyone kindly suggest a local source for guiding me through re-assembly of the gear box properly, and, where can I procure a replacement motor? I look forward to your replies.

Ktown Militia September 18th, 2008 17:12

Quote:

Originally Posted by innof (Post 821371)
Very good info. fellows, so Thanx. Unfortunately, I followed the leads carefully for their entire length and no fuse anywhere..... look slike I may have cooked the motor by forcing it (damn!). Can anyone kindly suggest a local source for guiding me through re-assembly of the gear box properly, and, where can I procure a replacement motor? I look forward to your replies.

fill in your profile so we know where you are!!!!

innof September 18th, 2008 23:38

Hello again to all. Sorry for the delay in filling out my profile, I had some trouble witht eh system but all is good now. So, what's myt best course of action here since i don't think I'm too comfortable with opening up this gearbox myself especially after I believe that i even blew the motor to boot! Thanx.

Muffin September 18th, 2008 23:45

Send it to a gun doc. I can't think of any names off the top of my head, but they do exist. Its just gonna cost you shipping it to and back, any nessessary parts and labour.
Welcome to airsoft.

innof September 19th, 2008 10:41

I guess that a gun doc is probably the best way to goi, but, how do i find a qualified one and where can i buy any parts that are needed for my gun?

Ktown Militia September 19th, 2008 12:33

I purchase parts from airsoftparts.ca. Super fast shipping, good prices too. as for the gun doc, post a help wanted in the doctors corner forum.


All times are GMT -4. The time now is 17:30.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.