Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)
-   -   Kraken AK-47 (https://airsoftcanada.com/showthread.php?t=68311)

pieman10123 October 1st, 2008 18:53

Kraken AK-47
 
I have a kraken and want to install a silencer but I dont like how it would stick out the end is it at all possible to eliminate the whole front assembly and put a silencer where it would be? like these?

http://img.photobucket.com/albums/v1...Picture044.jpg
http://img147.imageshack.us/img147/2078/ak47sddy4.jpg

thanks

Dusti69 October 1st, 2008 19:21

well the fact that those ones in the pics you found have already been done then yes
notice both of them have beta front retainer/sights on them. youd probly need to get one of those or a 74u one and cut your outter barrel

ex October 1st, 2008 19:25

http://ebaybanned.com/product_info.p...oducts_id=1691

pusangani October 1st, 2008 19:32

you cant do what is done in those pics with a kraken front end, you would need a shorter outer barrel and as in the first pic, you would need a beta spetz front end, which has a shorter inner/outer barrel and a shorter set of foregrips

pieman10123 October 1st, 2008 19:33

Thanks ex but i don't like the way that silencer looks i had already seen that one. Where can i get a beta front retainer/sight?

pieman10123 October 1st, 2008 19:34

where can i get a beta spetz front end?

Dusti69 October 1st, 2008 19:34

ebaybanned.... wasnt it already posted?
http://ebaybanned.com/product_info.p...oducts_id=1290

i dunno about that though.... i know i saw a beta front sight somewhere and i thought for sure it was ebay banned. and you should be able to mod the krakens outter barrel with a hacksaw, drill, and file

pieman10123 October 1st, 2008 19:34

no

pusangani October 1st, 2008 19:35

parts section but they are rare and you need to be age-verified first

pieman10123 October 1st, 2008 19:36

which one can u post a link?

pieman10123 October 1st, 2008 19:41

do you think i could do a bit of a custom job like cut off a bit of the front assembly? and then somehow put the silencer on then?

pusangani October 1st, 2008 19:47

basically u would need to cut the outer barrel, then drill 2 new holes for where the screw that holds the gas tube and front sight go and voila! it's been done before, try searching on asc , I think Amos did something like this before

ShelledPants October 1st, 2008 19:49

Quote:

Originally Posted by pieman10123 (Post 831532)
do you think i could do a bit of a custom job like cut off a bit of the front assembly? and then somehow put the silencer on then?

I don't know. Can you? Are you able?

Airsoft guns are pretty adaptable when it comes to modification. I suggest investing in JB weld, a hacksaw, and if you fuck up; Buy a new assembly. Asking others about your own ability to create is a pretty hard question to answer when none of us know you.

Skladfin October 1st, 2008 19:53

are you really 19? You lack ALOT of common sense for a 19 year old.

pieman10123 October 2nd, 2008 07:28

thxs ill search


All times are GMT -4. The time now is 22:19.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.