G36C Silencer
 

I am looking to extend the inner barrel on my G36C, Thinking of hiding it in a silencer

I know the threads are a bit hidden inside the hand gaurd and therefor a narrow silencer is needed...
Anyone know what the dimensions of a silencer that would work are?

Most seem to be 40ish mm's wide...

You could also get a G36k extension barrel and use that with a flashhider, or that paired with a silencer of some sort.

That's a waste of money when you can just spend that $25 on the cost of silencer itself. You just need a silencer with a bit of an extension or lip like the MK23 socom ones.

http://img258.imageshack.us/img258/2730/snowyg36vq1.jpg
http://img258.imageshack.us/img258/s...jpg/1/w963.png

I have a 420mm barrel in there. I probably could have gone with a 455mm AK barrel. Definetely don't use a 40cm diameter silencer. They are so fat. 20-35mm at most.

http://www.airsoftparts.ca/store2/in...oducts_id=1134

that the one you have on there? looks like it

thanks Saint, although the silencer that SNK has on there seems to fit pretty solid, It looks to me like the one from airsoftparts.ca that i inked... if it will fit without me having to spend another 30 bucks on the extender, then im set.
just wanna make sure that that is in fact the one hes talking about.

Mine is G&G but the King Arms should be the same basically.

alright thanks, i guess worst case scenario,it arrives, doesn't fit, and i suck it up and pay the extra 30 bucks for the extender

Trust me, there's no way it won't fit.

wait, i mean the

http://www.airsoftparts.ca/store2/in...oducts_id=1134

are you saying that wont fit? its like the same as yours...

Double negative in there. There's no way, it won't fit. IE: it is impossible for that NOT to fit.

It will fit nomatter what. :D

Nice G36C.
Where did you get that top rail with H&K markings on it? is that from a RS one?

well, gone ahead and ordered my silencer and my tight bore,
got a 455mm, AK barrel
I am wondering if you think it will be too long, anyone with tight bore experience have any ideas?

stock G36 barrel is 247mm+a 195mm tight bore, that gives me 442mm of space,
Think that the extra 13mm will fit?
its almost nothing, ima thinking that the 247 is leavening a few cm's of space extra..
thoughts?
knowledge?
please...
enlighten me!

Just make sure that you change your cylinder so that it matches the length of your barrel.