ICS MP5 A5
 

Hi so, its not mine but one of my friend want is gun back.
the probleme is when the battery is plug, its look like no power and the fuse is good.. the fire selecter move to much, and when it on safe i can pull the trigger!

So if u think u can help me let me know.. if i cant do it myself, my friend is willing top pay someone to do it.

Thank's in advance


Bonjour, j'ai un probleme avec un ICS mp5 a5, ce n' est pas la mienne, donc je n'est jamais vraiment joué dans ce type de gearbox, lorsque l'on branche la batterie il ni a pas de courant, la fuse est tjrs bonne. Le sélecteur de tire bouge beaucoup et on entend pas les son lorsque on le clise vers d'autre fonction. Lorsque l'arme est sur safe, je peux toujours presser sur la détente.

Alors si quelqu'un croit qu'il peut m'aider il est le bienvenue. Sinon mon ami est pres Ã* payer pour la réparation.

Merci


Flash

I heard a lot of mp5 from alot of brands, like the JG ones had that problem, that the trigger still moves or even shoots semi-auto, when on safe! and I also heard that the fire selector won't lock on SEMI so the gun couldn't shoot in Semi-Auto,

Does the gun actually fire when you pull the trigger on safe? If not, then it's not really a problem. Switching to safe and keeping a finger off the trigger until you're ready to shoot is more than enough safety. If it will fire, then I'm not sure what it could be offhand, and IMO, should be repaired.

Worn selector plate
Worn Selector lever
Bent/misplaced copper tabs (under the plate)
Missing/bent/worn *insert name* (The little plastic part at the bottom front of the mechbox. That is the mechanical safety)

A lot can be in cause.

Check these first. I had an issue with an M16. It was the little plastic part that was backwards (it can be installed and the gun works in both directions).

thank .. im taking t a part right now .. just figuring how everything work...

From now ... its look like no power go trough the motor

so it's this part broken! the one on the left!
Can anyone help me to find this?

The white part with the spring is slighty used! Can this thing mage the cycle harder to do ?

When i pull the trigger, its look like sometime its miss the white part!

You'll need one of these except for MP5 (or ICS, don't know if it's different because of that, looks different than an armalite one):

http://www.airsoftparts.ca/store2/in...roducts_id=459

That's just because the cylinder and tappet plate are out. It should stay straight with them in there.

yeah ... t what i tought first too but ... its seem that the plastic is all rubb