Solution for G&P VLI tactical light switch problems.
 

Hello, this is a solution for the ones who have an ON/OFF swtiching problem on this Flashlight:
http://www.kicbbgun.com.tw/shop/imag...ges/3421_0.jpg

it is a rather expensive one (considering the fact that it's cheap crap) so its owner are probably wondering how to maintain or fix this light, since it's sturdy and practical with its embedded rail.
The answer is very simple: you can't.
the only thing you can do is change the bulb.

however, if you end up with a non working switch, it's normal: the switch inside is a crude piece of metal made with their feet by down-syndrome squirrels.
You cannot remove the back (the switch end) of the VLI because it's glued to the body.the screws are fake :D

here is how I fixed mine:
pierced holes with an electric drill
tore the switch end off and insulted it.
(off course it gets destroyed in the process.)
inside there is a connexion plate with the risible switch, a pair of blue electric cables and a black rubber thing that holds the - pole spring in position.
( in my case the cable disconnected from the spring.)
after I removed everything:

http://s225.photobucket.com/albums/d...6/977a47fd.jpg

http://s225.photobucket.com/albums/d...6/d3a9b73c.jpg


re-soldered everything that was broken on another switch ( I used the contact switch that came with it )
I found an old plastic cap to fill the hole.

http://s225.photobucket.com/albums/d...6/7e9772fa.jpg

after some hammering

http://s225.photobucket.com/albums/d...6/770a1f80.jpg

and some paint+tape

http://s225.photobucket.com/albums/d...6/5a96b1b5.jpg

Lol... Almost got that model last week... 100$us

I knew it was crap!

:cool:

Whit the low canadian dollar I bought one over here instead at DS Tactical for 109$cd.

https://dstactical.com/product_info....oducts_id=1197

:)

yes yes but the point with that VLI is that it's beautiful.

does anyone know where to buy the real ones ?

added pix