Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Newbie Tank (https://airsoftcanada.com/forumdisplay.php?f=203)
-   -   WE1911 vs KJW1911 (https://airsoftcanada.com/showthread.php?t=77296)

marcwhite February 23rd, 2009 02:09

WE1911 vs KJW1911
 
is the we 1911 classic better than the kjw?

The Saint February 23rd, 2009 11:15

No, the KJW is better. It is an accurate clone of the TM1911, thus more aftermarket parts are available for it.

Conscript February 23rd, 2009 11:22

Quote:

Originally Posted by The Saint (Post 925329)
It is an accurate clone of the TM1911, thus more aftermarket parts are available for it.

It depends on which KJW 1911 you are getting, the old Version 1's aren't Marui compatible since they came out way before Marui made their 1911. Version 2 is a Marui clone however.

The Saint February 23rd, 2009 11:30

If you want to get into it, yes, but it's very difficult to find the first KJW1911. They cloned that off the WA. Not many were made due to significant issues and most were pulled.

marcwhite February 23rd, 2009 14:56

should I just get a kwa or wa then?

The Saint February 23rd, 2009 14:58

What are the qualities you are looking for in a 1911?

Kuro_Neko February 23rd, 2009 18:26

If full metal isn't an issue then WA or TM is the way to go. If full metal is something you have to have and don't want to spend a fortune for an upgraded gun then KJW is your best bet.

Kuro_Neko

Crunchmeister February 23rd, 2009 18:31

So the current version of KJW 1911s are now 100% TM compatible? I was under the impression that they weren't. If so, that could be something I'd be looking into in the near future...

The Saint February 23rd, 2009 18:41

Pretty close to 100%. I think the rear sight is cast into the slide or something. There might be a few minor differences, nothing as dramatic as the WE.


All times are GMT -4. The time now is 18:45.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.