New (used) KSC Gloco 19
 

Alright ladies and gentleman, I just rceived my new (used) KSC Glock 19. No manual was included, and for the life of me I can't figure out how to open the the plate on the botoom of the mag to fill it. Can someone lend an hand. Also while you're at it inform me how to remove the slide please.

Thanks

you just need to pull down the spring that used to push the BBs outside of the magazines. Notice that bottom that close to the plate, then you actually can pull it down. hope it help but if not then add me on MSN, I will show on my cam.

Cheers !
KND

look at the track where the BB's line up, there should be a thing at the bottom of the track that you pull up then slide the bottom off.

push up the follower spring and then slide it out

Thanks Amos and the others thats what I needed. And to disasemble?

Partially rack the slide back (while the mag is out of the gun), and while you hold the slide partially back, push the two frame "buttons (?)" down and hold them down while you release the slide and gently pull it off the gun. i hope that makes sense http://www.airsoftcanada.com/images/..._confused2.gif

You sure have a lots of question.

For the disassemble is quite easy, you need to cock the gun first then notice to small click on each side and press it dow then the side will be slide out. The two black button notice on the lower receiver. Hope it help again.

Cheers !
KND

It does thanks for all the help. And KND I'm sure I'll ask you even more questions when my TM mp5 sd5 gets here in a few.

@notom66866

I cannot say for for certain about your exact model, but I do know there are a lot of videos on youtube that have disassembly/reassenbly of various pistols and AEGs. Some "reviews" of pistols have the reviewer take the entire pistol down. Just a thought as that is how I have found a lot of useful info for myself.