Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Gear Discussion (https://airsoftcanada.com/forumdisplay.php?f=26)
-   -   Hi-Capa Holsters (https://airsoftcanada.com/showthread.php?t=77769)

Metninja March 2nd, 2009 14:22

Hi-Capa Holsters
 
I'm looking for a either a good MOLLE holster I can rig up to my pantac vest, or a good hip holster for a TM 5.1. Drop leg works too, but I prefer the other two. Not looking to spend too much, needs to be a cloth type one, don't want hard plastic scratching up my sidearm. Does anyone know of any good ones?

Endymion March 2nd, 2009 14:39

HSGI has a nice one in either vertical or horizontal orientation. I believe SKDTac had them on sale a little while ago.

Metninja March 2nd, 2009 14:42

Quote:

Originally Posted by Endymion (Post 930931)
HSGI has a nice one in either vertical or horizontal orientation. I believe SKDTac had them on sale a little while ago.

Got links? Not familiar with that abbreviation.

edit - nm found it.

Crunchmeister March 2nd, 2009 14:56

Eagle makes a really nice universal drop leg holster that will accept anything from a small pistol to a Deagle along with a tac light or laser. It can be set up for both right or left hand use. And unlike other holsters where the leg straps go under the holster, allowing the gun and holster to flop around, these straps go OVER the holster. So you can run your ass off and your gun is always tight and secure to your leg.

LeGROS March 17th, 2009 19:34

Bump... looking for the same thing

Gato March 17th, 2009 19:43

Quote:

Originally Posted by Crunchmeister (Post 930947)
Eagle makes a really nice universal drop leg holster that will accept anything from a small pistol to a Deagle along with a tac light or laser. It can be set up for both right or left hand use. And unlike other holsters where the leg straps go under the holster, allowing the gun and holster to flop around, these straps go OVER the holster. So you can run your ass off and your gun is always tight and secure to your leg.

Where would I go about getting one of these?


All times are GMT -4. The time now is 11:57.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.