G&G Carbine Spring..
 

G&G Gr16 Carbine can hold 120 spring with stock parts ?

Thank you:)

yes.

You sure about it ?

i didn't want to break something..

dude, there is always risk. will it be able to handle it? ya, it will. will it last longer than a gun that has been reinforced? no, probably not.

i agree. any internal modification that puts more stress on your gearbox will inevitably shorten its life-span, and of all the things you could upgrade, the spring will create the most strain on all the parts of your gearbox. that said, G&P does make some of the best reinforced boxes around, and the internal parts are already top quality so you should be fine. im pretty sure they design them to take a m120 anyways. i know lots of people who run 120's in G&Ps with no problems, including myself.

He's got a G&G tho, not a G&P.

I don't think a G&G would hold a 120 for an extended period of time..

A sorbo pad would help this though :)

dont get an m120, get an m110.

u can still get amazing range with m110 with great consistent shots. Dont be a fool for the whole higher fps ordeal.

get an m110, a modify airseal nozzle and firefly or guarder medium hard hopup rubber and ul be flying well with fps since these little upgrade will imprce ur fps, no need for a stronger spring.

Also need torque up gears., and maybe a larger battery.

Thank you guy's..

i have 110 spring in the stock i didn't think i need to buy another one..
Maybe i get new 110 spring of systema..

and my battery is intellect 9.6.

so you say to buy new hard hop up rubber & air seal nozzle ?

and the Accuracy will be change ?

woops! too many airsoft companies start with "G" ;)

Yes, the airseal nozzle will provide more seal since it has an internal o-ring, that wil lgive u more seal and more fps.

Yes, ur accuracy range will increase if u use bette hop up rubber.
-a good one is the Guarder clear, usually its for under 400fps aegs, also, find a FIREFLY hopup rubber. just look on a site, and usually it says for wat typr of fps u should get it for. get a hopup rubber that isnt too hard and not too soft, anything that says for under 400fps aeg;s.
- get a madbull m110
-another thing that will increase seal, is a double o-ring cylinder head, u can find all of the above mentioned parts at airsoftparts.ca.

You don't need torque up gears. A large battery would help though.