6mm or 7mm in G&G Cansofts??
 

I would like a gun doc if possible to confirm this..

The G&G GR16 cansoft versions from Mach1 and CAS, etc etc.. Are the bushings 6mm or 7mm. I really need a solid answer as I'm in need of ordering some internal parts. I'm thinking 7mm as they seem bigger than those in my other gun which are 6mm.

They are 7mm bearing bushings.

lol..

You had said that before. Ok I just need to be sure as I'm ordering FTKs through Jugglez and I think those kits are with 6mm bearings, so I'll need to get 7mm v2 gearset instead.

Thanks

Mine has what looks like 8mm brass bushings.

I dumped some bench notes in another thread...let me check. Jugglez asked me last night and I haven't replied to him yet.

***EDIT***
HERE it is...

Bad news is...I think that they may even be bigger than 8mm...not sure, I didn't mic them.

Good news...they're at least bronze...they'll last longer than plastic, but not as long as sintered/SS metal.

ALSO...these were the G&G M4's from Mach1...I have no idea if there are lower/higher/variations of different models with different build parts...