missfeeding mags
 

Good day all, i have an M4 from King Arms and i have star mags , all are 30 rounds mags, and they are all missfeeding.:banghead:
Now here is my question , should i use only king Arms mags or is there something i can do to solve this issue .

thank you for your help.

Super 6-1 ,
Tacktik contractor 2IC
Montreal

Look at the top of the mags, you see that little spring-loaded clip that holds the BBs in? Cut or file off 0.5mm of it, that should fix your problem.

I had the same problem with my KA and STAR mags. The fix below works with both brand of mags:

http://i347.photobucket.com/albums/p...g/feedlips.jpg

To do this modification, I used a sharp, fresh new x-acto-blade for each mag and sliced a small amount off the feed-lip, then did a test to see if the mag was feeding properly. If it was still not feeding well, I would slice a little more off the lip.

Hope that helps :)

be sure that you don't slice too much otherwise it won't hold BBs then you need to replace it. I fixed all mag within this solution.

KND

Cool , thank you all for your tips , i will try this fix tonight.

thanks again.

This question has been asked at least a half dozen times over the last year...and the solution seems to have been written up (with pictures/diagrams/etc...) at least as many times.

Perhaps they should be combined and stickied as a solution?