Airsoft Canada - P-Mag feeding problems.

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Accessories Discussion (https://airsoftcanada.com/forumdisplay.php?f=25)

- - P-Mag feeding problems. (https://airsoftcanada.com/showthread.php?t=83432)

BoB	May 28th, 2009 16:49

P-Mag feeding problems.

Has anyone had feeding issues with this mag?

Mine shoots a couple before it dry fires. Most of the time I can't empty a full mag. Once empty the spring doesn't even return to the top-it usually stops a half inch down the mag.

Azathoth

May 28th, 2009 17:44

What type of Pmag are you using?

Quote:

Originally Posted by Oborous (Post 915308)

Hiya all,

Have done search, no love.

I have an issue, just picked up a box of Green-line PMAGs, 75 rounds. We had a pre-season tune-up day and had a heck of a time feeding into my gun. I found if I hooked my thumb around back of the mag to pull forward and up, I fed reliably. My gun is a bit of a franken gun, purchased from here, with really high quality parts but all sorts of brands, so isn't as happy of a gun as I'd like.

try this

http://www.airsoftcanada.com/showthr...highlight=pmag

panzergrenadier

May 28th, 2009 17:49

I used some Electrical Tape and shimmed the back of the mags with it to fix the feeding a few rounds and then dry firing problem...

BoB	May 28th, 2009 18:07

Ah ok. I had the same problem with my king arms mags but did not think it was the same thing. I will try to shave a bit off the feed lip.

Thanks.

MilanWG

May 28th, 2009 18:23

http://i347.photobucket.com/albums/p...g/feedlips.jpg

BoB	May 28th, 2009 19:02

The feed lip on the king arm mag is seems way to short to shave any off with out the bbs shooting out. The spring on my p-mag however still does not extend all the way to the top. I don't know what the name for it is, but the plastic piece that sits on the top of the spring still sits about half inch below the feed lip. Guess I just got a bad mag..

Dynamo

May 28th, 2009 21:53

Quote:

Originally Posted by BoB (Post 996539)

in teh case of airsoft, it would be called a BB follower, or just Mag follower.
there may be a rough spot in the BB channel thats catching on the follower.

Shirley

May 28th, 2009 21:58

Which PMAG is it? Green Labal or the Genuine 120rd?
If it stops in the middle of your PMAG, than it's your BBs causing a BB jam.
What brand are they? Give them a smack when it gets stuck.
If it continues, switch BBs or fill the PMAG with less BBs.

viraL

May 29th, 2009 15:39

I have the STAR PMAGs, got em from ASP. About 6 of the 10 had feeding issues. Dropped a drop of silicone lube down there, filled them up like 3 or 4 times and used a screwdriver the push the bb follower up and down and now they all work AMAZINGLY. Had to do this to my King Arms 120RDs too

All times are GMT -4. The time now is 12:12.