Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Doctor's Corner (https://airsoftcanada.com/forumdisplay.php?f=18)
-   -   Gun won't shoot. (https://airsoftcanada.com/showthread.php?t=85425)

Decimator 3000 June 29th, 2009 20:55

Gun won't shoot.
 
Hi, I'm writing this on behalf of my friend whose G&G MP5 Blowback isn't working. His gun just won't shoot, at first we thought it was the battery however we tried multiple batteries and none of them did the trick. He hasn't used it much and he always keeps it inside the box it shipped in when he's not using it. The gun appears to be in mint condition, no scratches, dents ect. The gun hasn't been dropped or modified in anyway. We thought to contact the website he bought it from (buyairsoft.ca) but the site appears to be down :confused. I realize that anyone reading this won't be able to provide an answer based off this broad description of the problem. I was however wondering if anyone has any theories behind, things he could try to get it working again or a place where he could get it looked at. Thanks.

kalnaren June 29th, 2009 20:59

Do you hear a slight "clicking" when you pull the trigger? If sothe mechbox is probably locked. Pull the motor out and trip the anti-reversal latch.

zone 69 June 29th, 2009 21:00

See if the fuse is blown.

Con Murder July 2nd, 2009 01:55

Quote:

Originally Posted by kalnaren (Post 1016067)
Do you hear a slight "clicking" when you pull the trigger? If sothe mechbox is probably locked. Pull the motor out and trip the anti-reversal latch.

NICE! Just had my friends G&G mp5 (sound familiar?) lock up... And ya, I opened it up but the anti reverse is in the mechbox with no access except the hole the motor goes through. Any way to trip the latch from the hole?

Forever_kaos July 2nd, 2009 02:54

Yep.
Bend a coat hanger or other sort of tool

Poke in there man!

lyncher July 2nd, 2009 08:08

Coat hanger, Oring Pick, really anything thats sturdy enough, to force the latch to release

Con Murder July 3rd, 2009 12:11

You guys are the bomb man, shit is all good and done!

curlex July 3rd, 2009 18:08

I have the same porblem with my blowback m4, but can anyone give me info on HOW exactly to reverse the latch?

Con Murder July 3rd, 2009 21:52

Remove the motor and handle (two screws on bottom of handle and then two inside) remember the motors orientation. Look inside, maybe with a light, and you'll see a gear imediatly inside. On the side oposite the trigger you should see a metal peice with a very small thin wire on it, this is the anti-reverse latch.

DO NOT GET CONFUSED! This small thin wire is not electrical, it is a spring mounted to the anti reverse latch. That springs hook identifies the latch while looking through the hole.

Use a sturdy item thin enough to get in and strong enough to apply force (think sticky jam jar) while still managing to grip the latch. I use needle nose plyers that are for bead work and angle to about 40 degrees (where is that button?!)

Best of luck [B]curlex[B]!

curlex July 4th, 2009 00:29

Thanks Con Murder for all the help!

Decimator 3000 October 15th, 2009 23:34

Alright, It's been a while and I have decided to get back on this. How do I check if the fuse is blown?

SHÖCK October 16th, 2009 18:27

Quote:

Originally Posted by Decimator 3000 (Post 1085002)
Alright, It's been a while and I have decided to get back on this. How do I check if the fuse is blown?

Is the battery in the front grip or in the buttstock? There should be a round plastic case on one of the wires with a fuse in it.

Buyairsoft has a bad reputation around these parts and you are probably sadly out of luck trying to get help from them or a return etc. since they were sold and are under new management who probably won't honor old customers.

Goto www.mechbox.com for videos on how to dissemble the mp5.

Decimator 3000 October 17th, 2009 12:30

Quote:

Originally Posted by SHÖCK (Post 1085443)
Is the battery in the front grip or in the buttstock? There should be a round plastic case on one of the wires with a fuse in it.

Buyairsoft has a bad reputation around these parts and you are probably sadly out of luck trying to get help from them or a return etc. since they were sold and are under new management who probably won't honor old customers.

Goto www.mechbox.com for videos on how to dissemble the mp5.

The Batteries are in the Grip, I'll take a look. In the meantime however the silencer on my G&G MP5 (the one with the problem belongs to a friend) won't cpme off and BBs are jammed up inside of it. I'm not sure if anyone knows how to fix that?


All times are GMT -4. The time now is 14:44.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.